Laminar Flow Workstations

Laminar Flow Workstations provide a high degree of localized control for critical processes. The Laminar Flow Workstations operate by drawing ambient air, under negative pressure, into the top of the unit. This air first passes through a pre-filter which traps the larger dust and dirt particles. The blower then directs this pre-filtered air, now under positive pressure, through the 99.99% efficient HEPA filter engulfing the entire work area with sterile, unidirectional ultra-clean air. This air travels at a velocity calculated to prevent the intrusion of unfiltered room air into the work area. It also washes away particles that may be generated by manipulations within the Workstations. Sterile, particle-free air is essential in such diverse processing areas as electronic assembly, sterile packaging and hospital pharmacy I.V. preparation. These processes and products require isolation from the contaminant typically found in ambient air. This clean environment can be best achieved and maintained by utilizing filtered laminar flow air in an appropriate workstation.

Vertical Laminar Flow Workstations

The Vertical laminar Flow Benches meet the same high standards for ultra-clean, particulate-free air as our Horizontal Laminar Flow Benches Series. The work area is bathed with filtered air directed downward by the low profile HEPA fan filter module at the top of the unit. These free-standing units are used primarily for parts assembly and/or to house process equipment which, due to its configuration, is best protected by vertical laminar airflow.

Horizontal Laminar Flow Workstations

The Horizontal Laminar Flow Workstations is designed for the handling of materials wherever a particle-free work environment is required. The work area of the Horizontal Laminar Flow units is continuously bathed with positive pressure, horizontal laminar flow air that has passed through a HEPA filter (High Efficiency Particulate Air).